
Welcome to the Shelley Signs - the home of tough, robust but beautifully printed and finished outdoor signs. We supply and offer an optional design service for interpretive panels, park entrance signs, information and wayfinding signs. Full colour printing, GRP encapsulation and a wide variety of framing structures are all available.
If you need to meet DDA requirements for outdoor sites our sandblasted timber signs offer an interesting and distinctive answer.
Please use the Showcase section of the site to gain a flavour of our wide range of work and projects.

PRICES FOR ALL BOARDS DEPEND UPON QUANTITY. PLEASE EMAIL VIA OUR ENQUIRY FORM OR PHONE 08453 705575 FOR A QUOTE.
MATERIAL: All boards are produced in Glass Reinforced Plastic (GRP). This provides an extremely durable board with a very low moisture absorption rate together with a high resistance to impact, abrasion and chemical damage.
BRITISH STANDARD: The D50 & D50R comply to B.S. 3680 : Part 7 : 1971 design.
SCREWS: Stainless steel screws to the specification below are supplied.
NUMERAL PLATES: D51 & D56 red datum numeral plates for use on D50 & D64 boards. Either separate plates or printed as part of the board.
INLAND BOARDS: All inland boards are supplied in 1 metre lengths and are 4mm thick.
| Location | Type | Width | Fixing |
| Inland | D50 | 145mm | 8 off, No. 10 x 38mm screws |
| D50R | 145mm | 8 off, No. 10 x 38mm screws | |
| D64 | 100mm | 8 off, No. 10 x 38mm screws | |
| D64R | 100mm | 8 off, No. 10 x 38mm screws | |
| Special Design | 180mm | 8 off, No. 10 x 38mm screws | |
| Scottish Design | 70mm | 8 off, No. 10 x 38mm screws |
| Location | Type | Width | Fixing |
| Tidal | D53 | 300mm | 7 off, No. 12 x 38mm screws |
| 'V' Notch Plates | Width | Length | Fixing |
| Angle 28 degree 4' | 132mm | 178mm | 8mm diameter holes |
| Angle 53 degree 9' | 240mm | 240mm | 8mm diameter holes |
| Angle 90 degree | 610mm | 330mm | 8mm diameter holes |
PRICES FOR ALL BOARDS DEPEND UPON QUANTITY. PLEASE EMAIL OR PHONE FOR A QUOTE.